Universal Menu Book/Read options/Resolution and density

From OptiWiki

The following options optimise the reader for different label qualities. The specific options supported are dependent on the reader hardware. Experiment with these options to get optimum reading performance.

Filter:
The option "filter ON" improves the reading of low density labels and labels with reduced printing quality.

Scan rate:
The option "scan rate LOW" improves the reading of high density labels together with a reduced power consumption.

Digitiser:
The option "high density" improves the reading of labels at a near distance and reading high density labels.

Gain:
The option "gain HIGH" improves the reading of low contrast labels and high density labels.

See figure 5.02.

File:ResolutionDensityGain.svg

Density:
See figure 5.03.

File:ResolutionDensityContrast.svg

	SET
Filter ON	X4	File:Menulabel X4.png
Filter OFF	X5	File:Menulabel X5.png
Filter alternating ON / OFF	X6	File:Menulabel X6.png
Scan rate high	TJ	File:Menulabel TJ.png
Scan rate low	TK	File:Menulabel TK.png
Scan rate alternating high/low	TL	File:Menulabel TL.png
Digitizer normal	TM	File:Menulabel TM.png
Digitiser high density	TN	File:Menulabel TN.png
Digitiser alternating normal/high	TO	File:Menulabel TO.png
Gain normal	TP	File:Menulabel TP.png
Gain high	TQ	File:Menulabel TQ.png
Gain alternating normal/high	TR	File:Menulabel TR.png
	END