Universal Menu Book/Interface/Wireless options/Bluetooth security

From OptiWiki

To provide additional security connections, the Bluetooth specification allows you to enable a special security setting, so that a PIN-code is required from the bar code reader in order to establish a connection.

Use "secured" connections
If you want to use "secured" connections:

• scan enable authentication label
• scan the PIN-code labels. The PIN-code is a code of 1 to 16 characters. Any personal combination alpha-numeric characters can be used. Read direct input (numeric) characters from the chapter: String options.
• enable authentication on the host
• if encryption is required, scan enable encryption labels

Use "unsecured" connections
If you want to use "unsecured" connections:

• scan disable authentication labels
• disable authentication on the host

	SET
Set PIN-code label	PINS	File:Menulabel PINS.png
End PIN-code label	PINE	File:Menulabel PINE.png
Authentication if not paired	AUTO	File:Menulabel AUTO.png
Disable authentication	AUTD	File:Menulabel AUTD.png
Enable authentication	AUTE	File:Menulabel AUTE.png
Disable encryption	ENCD	File:Menulabel ENCD.png
Enable encryption	ENCE	File:Menulabel ENCE.png
	END