Universal Menu Book/Code options/Setting code specific options/Options for UPC-E
From OptiWiki
The UPC-E symbology is a fixed length symbology encoding 6 data digits, a check digit and non printable start/stop characters. The following characters are supported:
- the digits 0 upto 9
An optional leading digit can be transmitted, which together with the data and the check digit forms an 8 digit field providing a compatibility with the EAN-8 format. For string format see figure 3.14.
UPC-E add-on 2/add-on 5:
The UPC-E symbology as described above can be succeeded by an additional 2 or 5 digit UPC-E code. For string format see figure 3.15.
UPC-E0 stands for UPC version E0 and the first digit is always a "0". UPC-E1 stand for UPC version E1 and the first digit is a "1". Options for UPC-E0 affects UPC-E1 too. Support for UPC-E1 is reader dependent.
Options for UPC-E:
- Enable transmission of the leading digit
- Disable transmission of the check digit
- Transmit UPC-E as UPC-A
Transmit UPC-E as UPC-A:
If this option is enabled, a UPC-E label is transmitted in the UPC-A format.
| SET | 
| |
| UPC-E, no leading digit, transmit CD | E7 | File:Menulabel E7.png |
| UPC-E, no leading digit, not transmit CD | E9 | File:Menulabel E9.png |
| UPC-E, leading digit, transmit CD | E6 | File:Menulabel E6.png |
| UPC-E, leading digit, not transmit CD | E8 | File:Menulabel E8.png |
| Transmit UPC-E as is | 6Q | File:Menulabel 6Q.png |
| Tranmit UPC-E as UPC-A | 6P | File:Menulabel 6P.png |
| END |
|
