C Language Development Kit/System settings/DWT7133
From OptiWiki
Below a list of all menu options that can be used in the
systemsetting() function of the DWT 7133 is shown.
The settings depicted in bold are default values.
This list is updated regularly. Please contact your local Opticon dealer if your application needs a setting that is not in the list to find out whether it is already implemented or not.
The list of system settings is divided into the following sections:
Baudrate settings
| Menu option | Description |
|---|---|
| K3 | 1200 baud |
| K4 | 2400 baud |
| K5 | 4800 baud |
| K6 | 9600 baud |
| K7 | 19200 baud |
Data, parity and stop bits
| Menu option | Description |
|---|---|
| L0 | 7 data bits |
| L1 | 8 data bits |
| L2 | No parity |
| L3 | Even parity |
| L4 | Odd parity |
| L5 | 1 stop bit |
| L6 | 2 stop bits |
Handshaking
Xmodem blocksize
| Menu option | Description |
|---|---|
| +1 | Xmodem block size 1024 bytes |
| +0 | Xmodem block size 128 bytes |
Enabling a single readable code
| Menu option | Description |
|---|---|
| A0 | All codes excl. add-on |
| J0 | Only all UPC and EAN codes |
| J1 | UPC only |
| J3 | UPC + 5 only |
| J4 | EAN only |
| J5 | EAN + 2 only |
| J2 | UPC + 2 only |
| J6 | EAN + 5 only |
| A2 | Code 39 only |
| JD | Tri-Optic only |
| A3 | Codabar only |
| J7 | Industrial 2of5 only |
| J8 | Interleaved 2of5 only |
| RA | S-Code only |
| AB | Matrix 2of5 only |
| JE | Chinese Post Matrix 2of5 only |
| A4 | IATA only |
| A7 | MSI/Plessey only |
| A9 | Telepen only |
| A1 | UK/Plessey only |
| A6 | Code 128 only |
| A5 | Code 93 only |
| J9 | GS1 DataBar only |
Enabling of readable codes
| Menu option | Description |
|---|---|
| A0 | All codes excl. add-on |
| R1 | Enable UPC |
| R2 | Enable UPC + 2 |
| R3 | Enable UPC + 5 |
| R4 | Enable EAN |
| R5 | Enable EAN + 2 |
| R6 | Enable EAN + 5 |
| B2 | Enable Code 39 |
| JZ | Enable Tri-Optic |
| B3 | Enable Codabar |
| R7 | Enable Industrial 2of5 |
| R8 | Enable Interleaved 2of5 |
| R9 | Enable S-Code |
| BB | Enable Matrix 2of5 |
| JS | Enable Chinese Post Matrix 2of5 |
| B4 | Enable IATA |
| B7 | Enable MSI/Plessey |
| B9 | Enable Telepen |
| B1 | Enable UK/Plessey |
| B6 | Enable Code 128 |
| B5 | Enable Code 93 |
| B0 | Disable all |
Disabling of readable codes
Options for UPC-A
| Menu option | Description |
|---|---|
| E3 | UPC-A, No leading zero, transmit CD |
| E5 | UPC-A, No leading zero, not transmit CD |
| E2 | UPC-A, Leading zero, transmit CD |
| E4 | UPC-A, Leading zero, not transmit CD |
Options for UPC-E
| Menu option | Description |
|---|---|
| E7 | UPC-E, No leading digit, transmit CD |
| E9 | UPC-E, No leading digit, not transmit CD |
| E6 | UPC-E, Leading digit, transmit CD |
| E8 | UPC-E, Leading digit, not transmit CD |
| 6Q | Transmit UPC-E as is |
| 6P | Transmit UPC-E as UPC-A |
Options for EAN-13 and EAN-8
| Menu option | Description |
|---|---|
| .9 | Disable EAN/UPC relaxed guard bar check |
| .8 | Enable EAN/UPC relaxed guard bar check |
| 6J | EAN-13 not transmit CD |
| 6K | EAN-13 transmit CD |
| 6H | EAN-8 not transmit CD |
| 6I | EAN-8 transmit CD |
| IB | Disable ISBN translation |
| IA | Enable ISBN translation |
| 6S | Select edge-to-edge method |
| 6T | Select straight forward method |
| .7 | Disable EAN13 missing end guard bar |
| .6 | Enable EAN13 missing end guard bar |
Options for Code39 and Italian Pharm.
| Menu option | Description |
|---|---|
| .B | Use min-max algorithm for thresholding |
| .A | Use reference algorithm for thresholding |
| D5 | Normal Code 39 |
| D4 | Full ASCII Code 39 |
| D6 | It. Pharmaceutical only |
| D7 | It. Pharmaceutical if possible |
| C1 | Not check CD |
| C0 | Check CD |
| D8 | Not transmit CD |
| D9 | Transmit CD |
| D1 | Not transmit ST/SP |
| D0 | Transmit ST/SP |
| DA | Not transm. ld. A for It. Pharm.Code |
| DB | Transmit leading A for It. Pharm.Code |
Options for Codabar
| Menu option | Description |
|---|---|
| HA | Enable only Codabar normal mode |
| H4 | Enable only ABC code |
| H5 | Enable only CX code |
| H3 | Enable Codabar, ABC and CX |
| H7 | Not check CD |
| H6 | Check CD |
| H9 | Not transmit CD |
| H8 | Transmit CD |
| F0 | Not transmit ST/SP |
| F3 | ST/SP: ABCD/ABCD |
| F4 | ST/SP: abcd/abcd |
| F1 | ST/SP: ABCD/TN*E |
| F2 | ST/SP: abcd/tn*e |
| HI | Disable intercharacter gap check |
| HH | Enable intercharacter gap check |
Options for Code 2of5
| Menu option | Description |
|---|---|
| /9 | Normal min-max width check interleaved 2of5 |
| /8 | Relaxed min-max width check interleaved 2of5 |
| -U | Threshold narrow-wide normal |
| -T | Threshold narrow-wide same |
| E1 | Not transmit CD |
| E0 | Transmit CD |
| G0 | Not check CD |
| G1 | Check CD |
| GH | Not transmit S-Code as Interleaved 2of5 |
| GG | Transmit S-Code as Interleaved 2of5 |
Options for IATA
| Menu option | Description |
|---|---|
| 4H | Not check CD |
| 4I | Check FC and SN only |
| 4J | Check CPN, FC and SN |
| 4K | Check CPN, AC, FC and SN |
| 4M | Not transmit CD |
| 4L | Transmit CD |
Options for MSI/Plessey
| Menu option | Description |
|---|---|
| 4A | Not check CD |
| 4B | Check 1 CD = MOD 10 |
| 4C | Check 2 CD's = MOD 10/MOD 10 |
| 4D | Check 2 CD's = MOD 10/MOD 11 |
| 4R | Check 2 CD's = MOD11/MOD10 |
| 4G | Not transmit CD |
| 4E | Transmit CD1 |
| 4F | Transmit CD1 and CD2 |
| 4S | Check 2 CD's = MOD 11/MOD 11 |
Options for Telepen
| Menu option | Description |
|---|---|
| D2 | Numeric mode |
| D3 | ASCII mode |
Options for UK/Plessey
| Menu option | Description |
|---|---|
| 4O | Not transmit CD's |
| 4N | Transmit CD's |
| GQ | Disable UK plessey special small termination bar |
| GQ | Disable UK plessey special stop character |
| GP | Enable UK plessey special stop character |
| %E | UK Plessey accepts small termination bar |
Options for Code128, GS1-128
| Menu option | Description |
|---|---|
| OF | Disable GS1-128 |
| JF | Enable GS1-128 only |
| OG | Enable GS1-128 if possible |
Options for Codablock-F
Options for Code93
Options for Code11
Options for Korean Postal Authority code
Options for GS1-Databar (RSS)
Options for Composite codes
Read mode options
| Menu option | Description |
|---|---|
| X4 | Filter ON |
| X5 | Filter OFF |
| X6 | Filter alternating ON/OFF |
Redundant reading
Default setting
| Menu option | Description |
|---|---|
| U2 | RS232 |
White space around barcode (= margin)
| Menu option | Description |
|---|---|
| YN | No margin check |
| YO | Margin check 1/7 nominal |
| YP | Margin check 2/7 nominal |
| YQ | Margin check 3/7 nominal |
| YR | Margin check 4/7 nominal |
| YS | Margin check 5/7 nominal |
| YT | Margin check 6/7 nominal |
| YU | Margin check normal |
Special options
| Menu option | Description |
|---|---|
| WN | Not line buffered input |
| WM | Line buffered input |
| 8Z | Charging indication LED disabled |
| 7G | Charging indication LED enabled |
| DX | DWT menuscreen password enabled |
| DW | DWT menuscreen password disabled |
| DX | Enable system menu |
| DW | Disable system menu |
| ZU | Disable sample output after a scan |
| ZT | Show sample output after a scan |
| YD | Accept menulabels as data disabled |
| YC | Accept menulabels as data enabled |
Text display options
| Menu option | Description |
|---|---|
| -W | Normal scroll |
| -V | No scroll display |
String options
Ouput length options
Resolution and density options
Positive and negative bar codes
Bluetooth options
Keyboard options
| Menu option | Description |
|---|---|
| WL | Keyclick off |
| WK | Keyclick on |
