C Language Development Kit/Loading software on the terminals/DCL153x

From OptiWiki

Jump to: navigation, search

Contents

Image

On all DCL153x terminals run an OS (operating system) and an application. The OS and the application can be loaded by a small PC application called APPLOAD.

Software codes
Both models of the DCL153x terminals have their own Operating System version that can be distinguished by an unique 3 letter code (starting with 'LB'). Before you try to load a new Operating System on a DCL15xx you have to know which Operating System file (i.e. LBKVxxxx.S32 for the DCL 1530) must be loaded on your terminal. In the table below you can find which software code belongs to which DCL 153x terminal.
Code Terminal
LBK DCL 1530
LBN DCL 1538
DCL1530
To load a new OS or application in the DCL 1530 by cradle, set the cradle in auto baudrate mode.

To load a new OS or application in the DCL1530 by USB cable, make sure that the device driver is loaded in the PC.
Load OS

  • Automatic (USB cable)
    • Connect the USB cable from DCL1530 to the PC and select the OS by appload.
  • Semi-automatic (cradle)
  • System menu (cradle)
    • Press all three buttons at the same time.
    • Use key [2] (Q2_KEY) to scroll to Download application.
    • Press the [trigger] key to select.
    • Place the DCL 1530 in the cradle and select the OS by appload.
  • System menu (USB cable)
    • Press all three buttons at the same time.
    • Use key [2] (Q2_KEY) to scroll to Download application.
    • Press the [trigger] key to select.
    • Place the DCL 1530 in the cradle and select the OS by appload.

Load application

  • Automatic (USB cable)
    • Connect the USB cable from DCL1530 to the PC and select the OS by appload.
  • Semi-automatic (cradle)
    • Make sure that the DCL1530 is not powered down. Place the DCL1530 in the cradle and select the application by appload.
  • System menu (cradle)
    • Press all three buttons at the same time.
    • Use key [2] (Q2_KEY) to scroll to Download application.
    • Press the [trigger] key to select.
    • Place the DCL 1530 in the cradle and select the application by appload.
  • System menu (USB cable)
    • Press all three buttons at the same time.
    • Use key [2] (Q2_KEY) to scroll to Download application.
    • Press the [trigger] key to select.
    • Place the DCL 1530 in the cradle and select the application by appload.
DCL1538
To load a new OS or application in the DCL 1538 by cradle, set the cradle in auto baudrate mode.

To load a new OS or application in the DCL1538 by USB cable, make sure that the device driver is loaded in the PC.
Load OS

  • Automatic (USB cable)
    • Connect the USB cable from DCL1538 to the PC and select the OS by appload.
  • Semi-automatic (cradle)
  • System menu (cradle)
    • Press all three buttons at the same time.
    • Use key [2] (Q2_KEY) to scroll to Download application.
    • Press the [trigger] key to select.
    • Place the DCL 1538 in the cradle and select the OS by appload.
  • System menu (USB cable)
    • Press all three buttons at the same time.
    • Use key [2] (Q2_KEY) to scroll to Download application.
    • Press the [trigger] key to select.
    • Place the DCL 1538 in the cradle and select the OS by appload.

Load application

  • Automatic (USB cable)
    • Connect the USB cable from DCL1538 to the PC and select the OS by appload.
  • Semi-automatic (cradle)
    • Make sure that the DCL1538 is not powered down. Place the DCL1538 in the cradle and select the application by appload.
  • System menu (cradle)
    • Press all three buttons at the same time.
    • Use key [2] (Q2_KEY) to scroll to Download application.
    • Press the [trigger] key to select.
    • Place the DCL 1538 in the cradle and select the application by appload.
  • System menu (USB cable)
    • Press all three buttons at the same time.
    • Use key [2] (Q2_KEY) to scroll to Download application.
    • Press the [trigger] key to select.
    • Place the DCL 1538 in the cradle and select the application by appload.
Views
Personal tools